1, place of use: indoors or outdoors.
2, ambient temperature: -25 ºC ~ + 50 ºC.
3, Altitude: not exceed 2000m.
4, the installation site should run no harmful gases or vapors, no severe mechanical vibration, conductive or explosive dust.
1, Rated frequency: 50 Hz / 60 Hz.
2, rated voltage: 0.23 kV ~ 2kV.
3, Loss: (tgδ) ≤0.05%.
4, capacitance tolerance: 0 to + 10%.
Allow overvoltage 1.1Un in each 24h 8h (system voltage regulation and fluctuations);
Allow overcurrent run continuously at 1.3In.
6, the maximum load: 1.35Qn stable operation (caused by over-voltage and harmonics).
7, built-in discharge resistors within 1 ~ 3min after power Capacitor discharges to 50V or less.
8, product performance standards: GB12747, IEC60831.
1, silver-zinc plated trapezoidal thickened edge of the capacitor capacitance with good self-healing and stability.
2, the unique gold spray process so that the capacitor has a good resistance to surge capacity.
3, BKMJ pure dry-type epoxy resin infusion device structure, the internal unit filled with an insulating harmless mineral filler particles to avoid the explosion of the capacitor, may burn and pollute the environment.
4, BSMJ type with sealing wax overall perfusion tank capacitor, its internal overpressure protection in the event of failure of the capacitor can be reliably isolated from the grid, to ensure that products do not leak, do not pollute the environment. Contact us if you need more details on Capacitor. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Capacitor、Capacitor. If these products fail to match your need, please contact us and we would like to provide relevant information.
Premium Related Products