Find Power Metering Box, Power Distribution Meter Box, Electronic Meter Case Energy Meter Power Meter B on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

Single-Phase Meter Box for 8PCS Meters

Basic Info

Model No.:  NDJ

Product Description

Model NO.: NDJ Installation: Direct Connected Electric Equipment: Three-phase Four-wire Power Meter Connection: Terminal Type: Power Meter Customized: Customized Specification: ccc HS Code: 85 Display: Digital Usage: Multi-Functional Energy Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Multi-rate Watt-hour Meters Theory: Electronic Meter Measured Signal: Continuous Wave Certification: RoHS, ISO, CE Trademark: VILLE Origin: China
Specification:
Rated current:380(A)
Dimension:1496×916×170(cm)
Certificate:CCC

Product Description
Meter box instructions

Manufactured new type of environmental protection engineering plastics polycarbonate (PC), has high insulation performance, good performance, ultraviolet radiation resistance, ageing resistance, acid resistance, salt fog resistance, high temperature resistant, good low temperature resistance, impact resistance and other properties, and have good ventilation, rain, heat dissipation and normal service life of more than 30 years.

This series electric meter box adopts integrated design concept, will be all kinds of watt-hour meter and the entire measurement circuit closed box set in integration, not only to take up the space is little, easy to install and manage, but also can prevent power thefter hit a metering device, prevent power theft.

This series meter box body model  beautiful, proportion, line is fluent, through the back of reserved bolt hole can be conveniently and securely installed on the concrete wall. Components in the compact structure, rational layout, the line to clear. Lid by hooks, special screws and interlock padlock with enclosure, only electric tube personnel by a special spanner and keys to open it. Glittering and translucent get rid of appears the lid .

Product scope and conditions of use

DX series electric meter box is suitable for ac 50 Hz or 60 Hz, rated voltage 200V, 380V, 693V, rated current for Power Supply system of the 6 A ~ 63 A, for single-phase power and power electric energy measurement and control of management.



Conditions of use:

environment temperature -40 °C ~ + 80 °C, and in 24 hours the average temperature is not more than +35 °C.

Clean air, relative temperature is no more than 80% in 40 °C, the temperature is lower to allow a higher relative humidity.
  

Current rating
Dimension
250A (300-1500)x(150-150)x(100-250)
225A (300-1500)x(150-150)x(100-250)
200A (300-1500)x(150-150)x(100-250)
180A (300-1500)x(150-150)x(100-250)
160A (300-1500)x(150-150)x(100-250)
140A (300-1500)x(150-150)x(100-250)
125A (300-1500)x(150-150)x(100-250)
100A (300-1500)x(150-150)x(100-250)
80A (300-1500)x(150-150)x(100-250)
63A (300-1500)x(150-150)x(100-250)
50A (300-1500)x(150-150)x(100-250)
40A (300-1500)x(150-150)x(100-250)
32A (300-1500)x(150-150)x(100-250)
25A (300-1500)x(150-150)x(100-250)
16A (300-1500)x(150-150)x(100-250)
10A (300-1500)x(150-150)x(100-250)

  We have four type material to choose : PC, SMC, Stainless Steel,Galvanized Steel.

   Main technical parameters
   main bus-bar rated current  ln: 6 A ~ 63 A
   main bus-bar Rated short-time withstand current  LCW: 30 KA
   insulation resistance: no less than 20 m Ω
   rated insulation voltage 800 V :
   frequency 50Hz or 60 Hz
   safety protection class IP: 33  or IP:43 

   Product installation and use
   When installation, please carefully check the save of parts of meter box.
   Meter box should be installed vertically, Angle should not beyond 5 °
   Installation position should choose no violent vibration, shock and corrosion is not enough to       electrical components.
  Materials used by meter box is not resistant to strong alkali, oxidizing acid, ketone and amine, soluble   in chlorinated diameter and aromatic solvents, and so should avoid contact with these chemicals or    used together.
  In use process should avoid sharp objects collision and hard objects scratch the surface of the meter   box.
  Meter box when installation should try to choose a cool, dry place, prevent sun direct illuminate for a    long time, in order to prolong the service life of watt-hour meter.


 

Contact us if you need more details on Power Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Metering Box、Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Low Voltage Electric Equipments > Others Low Voltage Electric Equipments